Guide
What is B2B prospecting? Types, process and where to start
B2B prospecting is the process of identifying, researching and contacting companies that could buy from you, to open a sales conversation with the people who decide there. Here is what each term means, how inbound differs from outbound, the types you will come across, the process in five steps and where to start if you have never done it.
By the GTM Flow team · Updated · 12 min read
What is prospecting in B2B sales?
Prospecting in B2B sales means looking for potential customers among other companies and taking the first step to talk to them. B2B stands for business to business: you sell to companies, not consumers. So you are not after just anyone, but the person who decides on or influences the purchase at a company that fits you.
Who writes this. This guide comes from the GTM Flow team, which makes a CRM with prospecting built in. The process works with any tool, or with a spreadsheet. The five steps and the recommendations are our judgment for teams of 1 to 10, not the result of a study.
There is no official definition, but CRM vendors agree on the essentials, with different emphases. Salesforce calls it the process of “identifying, researching, and contacting potential business buyers.” HubSpot says “identifying and qualifying potential business customers.” Pipedrive goes further and includes “guiding them through the sales funnel.” So the sources disagree on where prospecting ends, and we take the narrow reading here: it ends when a conversation starts.
“Sales prospecting” and “B2B sales prospecting” are used as synonyms. The “sales” matters because prospecting on its own also means searching for gold and minerals, and this guide is not about that.
What sets prospecting apart from selling is its goal. It does not try to close in the first message, but to get a reply and a first conversation with someone who makes sense. Salesforce puts it this way when describing first outreach: “The goal is starting a dialogue, not closing a deal right away.” The close comes later, through your sales pipeline stages.
Lead, prospect and opportunity: three words that get mixed up
A lead is usually someone who has shown interest, a prospect is a potential customer worth following up, and an opportunity is a possible sale in progress. The vendors do not draw these lines in quite the same place, so what matters is that your team settles on one meaning and applies it consistently.
| Term | What it usually means | How a source defines it |
|---|---|---|
| Lead | A person or company that has shown interest, or that you have data on | HubSpot: anyone “that has shown some level of interest.” Salesforce: someone who “has expressed interest” |
| Prospect | A potential customer who fits and deserves your time | HubSpot: “a qualified lead.” Salesforce: a lead “qualified as being more likely to convert” |
| Opportunity | A possible sale already being worked in the pipeline | Salesforce: “a qualified lead that has the potential to become a customer” |
Read side by side, those definitions leave a gap. Both vendors make a prospect a lead that has been qualified, which assumes the lead showed interest first. Yet Salesforce also calls B2B prospecting “proactive by design,” and in outbound most of the people you contact have shown no interest at all. In this guide we use prospect in that broader, everyday sense: any company or person who could buy from you and does not yet.
Deciding whether a prospect is worth it is a separate job, and it happens at two moments. Before you talk, you apply your ideal customer profile (ICP) to what you can see from outside. Once you talk, you qualify with BANT or MEDDIC.
Inbound vs. outbound prospecting: the difference
The difference is who takes the first step. In outbound prospecting, you do: you choose the company and write or call without it having shown interest. In inbound, the buyer does: they read an article, download something or ask for a demo, and you respond. Most teams end up using both, because they solve different problems.
| Aspect | Inbound | Outbound |
|---|---|---|
| Who starts | The buyer | Your team |
| Where the contact comes from | Content, your website, your product or a demo request | A list of accounts you chose |
| What you know in advance | What they did and why they might be interested | What you can see from outside: sector, size, title and timing |
| What you control | What you publish, but not who arrives or when | Who you contact and when, but not whether they answer |
| Main work | Replying quickly and ruling out those who do not fit | Choosing well, having a reason and following up |
| Rules | There is prior interest, and each channel still has its own rules | Check what each channel allows before you start |
Outbound B2B prospecting, according to HubSpot, means proactively identifying target accounts, researching relevant contacts and starting the first conversation before the buyer has shown interest. As it puts it, “the core difference between outbound and inbound prospecting is who starts the conversation.” The best-known part of outbound is cold outreach: we cover B2B cold email and cold calls in their own guides.
Is inbound really prospecting? The sources disagree. HubSpot writes that inbound prospecting “is buyer-initiated,” and Pipedrive describes it as connecting with a lead who has already expressed interest. Salesforce writes that for B2B sellers “prospecting is proactive by design.” Our practical reading: answering a demo request is sales follow-up, and prospecting starts when you take the initiative, even with someone who has given a signal, such as downloading a guide.
Types of B2B prospecting
The types of B2B prospecting differ mainly in how the contact begins: cold, from signals of interest, through a referral or at an in-person meeting. Each starts from a different relationship, and that changes what you can say in your first message. The channel is a separate decision, made after you have chosen the type.
| Type | How the contact begins | When it fits | What it needs |
|---|---|---|---|
| Cold | You choose the company; it does not know you | You have a clear ICP and little inbound interest | A list, a reason to write and patience |
| Signal-based | The company did something: read, downloaded, hired, opened an office | You publish content or follow your market closely | Someone who watches the signals and reacts soon |
| Referral | A customer or contact introduces you | You already have happy customers or a good network | Asking for it, and giving context to whoever introduces you |
| Events and trade shows | You talk in person and agree to continue | Your ideal customer gathers at certain events | Noting the contact and next step that same day |
Channels add on to any of these types. The usual ones are email, LinkedIn, phone and WhatsApp, the last only with people who gave you their number and permission. When you combine several in one sequence, that is multichannel outreach. For the method on one channel, see how to prospect on LinkedIn, and for choosing between channels when time is short, how to get B2B clients.
This is not legal advice. Rules for commercial messages change by channel and by country, and how they apply between businesses is not always clear. Our email and call guides cover the US rules. Check your case before you launch.
The B2B prospecting process in five steps
The basic process has five steps: define who you want to sell to, build a short list, find a reason for each company, make first contact with a few follow-ups, and qualify and record what happens. You repeat it in batches, and what you learn in one corrects the list and message of the next.
- Define who you want to sell to. Write down your ICP: sector, size, decision maker's title, timing and who you leave out. If it leaves nobody out, it is not useful yet.
- Build a short list. Look for named companies that meet those criteria and the right person at each one. Review it by hand; B2B prospecting tools help you find and verify data, but not decide.
- Find a reason. Before you write, look at what has changed at that company: a hire, a new office, a product. If you find nothing, that company may not belong in this batch.
- Make first contact and follow up reasonably. One message, one question and a few follow-ups that each add something. Stop as soon as they answer, on any channel. Our 14-day multichannel cadence template gives a day-by-day example.
- Qualify and write it all down. If there is interest, check need, timeline and who decides, and book the next conversation. If not, record why. Replies and rejections are what correct step 1.
Our five steps are not a standard, though they resemble the vendors' versions. HubSpot proposes defining the ICP and qualification rules, researching accounts and contacts, prioritizing, choosing the outreach path and logging follow-up. Pipedrive starts from the ideal prospect in your CRM data, then prioritizes, researches connection points, personalizes the first contact and nurtures. Salesforce proposes research, prioritization, initial engagement, nurture and a handoff to an account executive. That last handoff disappears on a small team, where the same person usually prospects and closes.
Where to start with B2B prospecting
Start with the smallest thing that teaches you something: a customer profile written in two lines, a list of about twenty named companies and one channel. You do not need to buy tools or write to thousands. First you need to know whether those companies answer, and only then is volume worth thinking about.
| Your situation | Where to start | What to leave for later |
|---|---|---|
| Founder with no customers | Conversations with possible customers and an ICP hypothesis; then a small list | Sending tools and long sequences |
| You have a few customers | See what they share, ask for referrals and write to similar companies | Opening new markets |
| You get inbound interest | Reply quickly, rule out what does not fit and learn from who arrives | Mass outbound before you sort out what already comes in |
| Team of 2 to 10 | A shared list, one meaning for each stage and one place to write things down | More channels before you have measured the first |
Measure little and by batch: how many people answer, how many replies are positive and how many conversations come out of it. We give you no percentage to compare yourself with, because published figures depend on the list, the channel and the sector, and the ones that will tell you something are your own. For a week-by-week plan, see how to build a sales pipeline from scratch.
Three common mistakes when starting out:
- Confusing prospecting with sending. Most of the work comes before the first message: choosing who and knowing why.
- Starting with the tool. A tool speeds up a process that already works, but it does not tell you who to write to or what to say.
- Writing nothing down. Without a record you do not know who answered, on which channel or which follow-up is due, and each batch starts from zero.
B2B prospecting in GTM Flow
GTM Flow is a CRM with prospecting built in: you import your lists, sort them by fit with your customer profile and run campaigns by email, WhatsApp and calls from the same record, with LinkedIn in manual steps. It covers outbound and follow-up, but it does not bring you contacts or inbound interest. It is in early access.
- Lists and fit. You import a CSV or sync Pipedrive, save filters as dynamic lists, and each account gets a fit score with the reason behind it.
- Channels on one record. Email goes out from your own mailboxes, LinkedIn runs with manual steps and per-profile limits, and WhatsApp only reaches people who gave their number and permission.
- The AI proposes and you approve. It proposes campaign steps with copy you can edit. An agent classifies replies, stops the sequence and creates the follow-up task.
What it does not do: it has no contact database of its own, it does not write your ICP for you and it does not replace the decision about who to sell to. It does not bring you traffic or content either, so inbound is up to you. There is more detail in how prospecting works in GTM Flow.
GTM Flow, the AI go-to-market platform, is in early access: it opens to teams in waitlist order and has no self-serve signup. The planned prices (Solo €39, Team €69 and Scale €149 per seat a month, billed annually) are on the pricing page. You do not need any CRM for your first batch: a spreadsheet is enough.
Frequently asked questions
What is B2B prospecting?
It is the process of identifying, researching and contacting companies that could buy from you, to open a conversation with the people who decide there. Its goal is not to close in the first message but to get a reply and a first conversation. There is no official definition, but Salesforce, HubSpot and Pipedrive agree on the essentials.
What is prospecting in B2B sales?
It is the part of the sale that finds and contacts possible business customers before there is an open opportunity. It usually ends when you have a conversation with someone who fits, and that conversation moves into your sales pipeline. Some vendors, such as Pipedrive, stretch the term further and include guiding the customer through the funnel.
What is outbound prospecting in B2B?
It is prospecting where your team takes the first step. You choose target accounts, research their contacts and start the conversation before they have shown interest, usually by email, LinkedIn or phone. It is the opposite of inbound, where the buyer comes to you first, for example after reading your content or asking for a demo.
What is the difference between prospecting and lead generation?
There is no single usage, so this is how we separate them. Lead generation is whatever attracts people who leave their details, usually run by marketing. Prospecting is the work of finding, choosing and contacting possible customers, usually run by sales. On a small team the same person often does both, and it helps to measure them separately.
Is inbound or outbound prospecting better?
Neither is better in general, because they solve different things. Inbound brings people who are already interested, but you do not choose who arrives or when. Outbound lets you choose who to contact, but it starts from zero. If you are starting with no audience or content, outbound is the one thing that depends only on you from day one.
What tools do you need to start prospecting?
For the first batch, a spreadsheet and your work email are enough. Tools become worth it once you know who to write to and the volume calls for them: one to find and verify data, one to send, and a CRM to follow each conversation. We compare them by category in our guide to B2B prospecting tools.
The CRM with prospecting built in
GTM Flow brings the CRM, cold email, LinkedIn, WhatsApp and calls into one system, with AI that tells you what to do next. Early access for founders and small sales teams. See how it works
Sources
- Salesforce: B2B Sales Prospecting: Top 5 Strategies for 2026 (June 25, 2026) · checked on
- Salesforce: Prospect vs. Lead vs. Sales Opportunity: The Differences (May 16, 2024) · checked on
- HubSpot: B2B sales prospecting: 11 best strategies to win buyers in 2026 (updated August 28, 2026) · checked on
- HubSpot: What is outbound prospecting? (updated October 15, 2026) · checked on
- HubSpot: The sales prospecting process (updated October 29, 2026) · checked on
- Pipedrive: The ultimate guide to sales prospecting with B2B data (modified September 29, 2026) · checked on
- GTM Flow: Pricing · checked on
Keep reading
Guide
How to prospect on LinkedIn
How to prospect on LinkedIn by hand: profile, search, invitation, first message and follow-up, with message examples to adapt for B2B sales.
15 min10 sourcesGuide
What is an ICP in B2B sales
What an ICP is in B2B sales and marketing, how it differs from a buyer persona and how to define yours: five steps, a template and a made-up example.
15 min5 sourcesGuide
B2B prospecting tools
B2B prospecting tools by category: data, cold email, LinkedIn, calling and CRM. What each one does and its public price as of September 2026.
19 min16 sourcesBy channel
Multichannel outreach CRM
Can you integrate a CRM with multichannel outreach tools? Yes, but replies split. Why email, LinkedIn, WhatsApp and call steps belong on the CRM record.
12 min4 sourcesGuide
How to qualify B2B leads
How to qualify B2B leads on a small team: what BANT and MEDDIC really ask for, which to use, and ten questions for a first call.
15 min9 sourcesGuide
Build a sales pipeline from scratch
How to build a B2B sales pipeline from scratch in 90 days with a team of 1 to 5: ICP, list, multichannel sequence, weekly activity and what to measure.
15 min7 sources